Heat Pumps Installation That Lowers Bills and Lifts Comfort
Proudly Serving Homeowners Across West Metro Atlanta
Ready for a quieter, more efficient way to heat and cool your home? We're based in Dallas and provide heat pump installation in Marietta, Acworth, Kennesaw, and the surrounding communities. Call 678-952-2323.
What Your New System Includes
A quality install is more than setting equipment in place. We match the system to your home and make sure every component works together. Here's what's typically part of a professional setup:
- Proper system sizing using a whole-home load assessment so your unit isn't too big or too small.
- Placement of the outdoor condenser for airflow, service access, and low operating noise.
- New or reused air handler matching the outdoor unit's capacity and blower performance.
- Refrigerant line set routing with clean brazed joints, pressure testing, and evacuation.
- Condensate management with a correctly pitched drain and safety float where needed.
- Sealed duct connections at the air handler to reduce leakage and hot-cold spots.
- Smart thermostat setup for efficient staging, setback schedules, and humidity control.
If your home is a good fit, we can also discuss ductless mini split systems for rooms that are hard to condition or for additions where ductwork isn't practical.
Need Fast HVAC Service? Our Technicians Are Available For Emergency Services!
Get A Free Quote
Comfort and Efficiency You Can Feel
Today's inverter heat pumps deliver even temperatures, fewer drafts, and quiet operation. They ramp up or down to match demand, which helps lower energy use without sacrificing comfort. You'll notice steadier temps from room to room and less cycling on and off.
Good installs also protect indoor air. Tight connections and balanced airflow help filters capture more dust and pollen. That means cleaner surfaces and fewer sneeze triggers during spring and fall.
For dependable heat pump installation across West Metro Atlanta, choose DR Cool for right-sized equipment and careful craftsmanship.
How Our Installation Process Works
- In-home evaluation: We look at square footage, insulation, windows, and existing ducts to dial in capacity.
- Options and guidance: You'll see models at different efficiency levels along with pros and cons for your goals.
- Scheduling and prep: We protect floors, move furnishings as needed, and stage materials for a smooth workday.
- Installation day: Our team sets equipment, verifies electrical and drain routing, pulls a deep vacuum, then charges the system to specs.
- Performance testing: We confirm supply and return temps, check static pressure, and verify quiet, stable operation.
- Walkthrough and settings: We program your thermostat, review filter changes, and answer care questions.
Care tip: Change or wash your filter every 1 to 3 months, keep shrubs 18 to 24 inches from the outdoor unit, and set small thermostat adjustments instead of large swings for the best efficiency.
Professional Heat Pump Installation
Whether you're replacing an aging system or upgrading from electric strip heat, our installers focus on long-term performance. We right-size equipment, set airflow for comfort in both heating and cooling seasons, and optimize controls so you're not overpaying on utilities. If you're weighing ducted versus ductless in certain zones, we'll help you compare costs, comfort, and appearance. When you're ready to get started with a trusted HVAC company, our estimators make it simple to choose the path that fits your home and budget.
Heat Pump Installation for Every Home
Every house is different, and heat pumps shine in many situations. If your home has warm upstairs rooms, chilly basements, or a sunroom that never feels right, we can design a solution that finally balances comfort. For projects with older ductwork, we'll assess leakage and static pressure to decide whether a quick seal and tune is enough or if a section needs rework for better airflow.
We also take on upgrades that go beyond a simple one-for-one swap. That includes converting from gas furnaces to all-electric comfort, setting up dual-fuel configurations that switch to gas only on the coldest mornings, and installing multi-zone mini split systems for home offices, garages, or bonus rooms.
- System replacements that cut noise and boost efficiency without redoing the whole duct system
- New construction and remodels needing a matched heat pump and air handler from day one
- Room-by-room solutions using ductless mini splits for targeted comfort and control
- Dual-fuel setups for homeowners who want electric most days with gas backup on rare cold snaps
- Thermostat and control upgrades that bring staging, geofencing, and energy reporting
Designed to Withstand Local Climate
Our region sees humid summers, long shoulder seasons, and occasional winter dips near freezing. Variable-speed heat pumps handle that swing well by dehumidifying in summer and maintaining steady warmth when the temperature bounces around in spring and fall. For homes with high indoor humidity, we'll fine-tune fan speeds and thermostat settings to remove moisture without overcooling.
Older neighborhoods often have a mix of insulation levels and duct designs. We check return placement, seal leaky joints, and confirm the airflow your new system needs so bedrooms and living areas feel consistent. That attention to detail means fewer temperature swings and quieter operation through allergy season and beyond
Local tip: Booking installs in the spring or fall can offer faster scheduling and more model availability. If you're flexible on dates, ask about same-week openings after a site visit.
Why Homeowners Choose DR Cool
Customers call us because we keep the process simple. You'll get clear options, a written estimate, and steady communication from the first visit to the final walkthrough. Our team treats your place with care and cleans up before we leave.
Licensed, insured installers handle your project, and we stand behind our work with solid warranty support from leading manufacturers. We service what we install, so when you need heat pump repair or a quick replacement, you already know who to call.
Get Your Estimate and Installation Date
If your current system is noisy, uneven, or driving up bills, now's a great time to upgrade. We'll size it right, install it cleanly, and set it up for years of dependable comfort. Call 678-952-2323 to schedule your visit today.
Questions Homeowners Ask Before Booking
Most standard replacements are completed in one day. More complex projects that add zones, relocate equipment, or include duct changes can take two days. We'll give you a timeline after your in-home evaluation.
Size depends on your home's heat loss and gain, not the square footage alone. We calculate the load and match equipment so it runs efficiently and keeps temperatures steady in every season.
Yes. Modern systems maintain comfortable indoor temps during typical winter lows in our area. For rare cold snaps, some homeowners choose dual-fuel or electric backup heat for added peace of mind.
Not always. If your ducts are in good shape, we'll seal and balance airflow to match the new system. If static pressure is high or rooms are starved for air, we'll recommend targeted fixes.
Pricing varies by home size, duct condition, efficiency level, and any added options like zoning or a smart thermostat. After the evaluation, we'll provide a clear, itemized estimate.
Our Latest Projects
Projects Coming Soon!
Our Recent Articles
Articles Coming Soon!
Local HVAC Experts Across West Georgia
Our service area continues to grow because satisfied customers continue recommending us to their friends, family, and neighbors. We proudly serve homeowners and businesses throughout the surrounding communities with dependable heating, cooling, and indoor air quality services. If you don't see your location in our service area list, give us a call. There's a good chance we can still help or point you in the right direction.